Ducati 748 916 996 998 Billet Parts
All Prices are inclusive of Post & VAT
CTMOTO Clutch Cover (Half or Full design)
The Ultimate Cover for your Dry Clutch
This Cover is milled from a solid billet block of Aerospace grade alloy
Unlike molded covers it is ultra strong for its low 147g weight
valuable protection to your expensive Clutch unit
Half
Cover £89.98 inc P&P 
Full
Cover (226g) £99.98 inc P&P
CTMOTO Clutch pressure plate
This Plate is milled from a solid Aerospace grade alloy block to give great strength
Performance is enhanced by keeping its weight ultra low @ only 284g Including Bearing!
Cooling is greatly increased by its distinct open face / spoke design
We have stock available finished in Marine grade anodised Red, Blue, Black, Silver or Gold
High quality SKF bearing fitted!!
This plate will fit all standard dry clutch models
(see offers for stainless spring sets)
£79.98
inc P&P
748/916/996/998 Clutch Set
Includes model specific Collars, stainless springs + stainless screws + installation key
£29.98
per set inc P&P
CTMOTO Frame Plug Set
CTMOTO 748-916-996-998 Billet frame plug set
manufactured to aerospace specification & anodized to give outstanding durability and looks in five anodised colours
The smooth domed design makes these plugs look like they are part of your bike,
beautifully finishing the openings on many Ducati frame tubes
They use our unique refined screw locking mechanism which gives a secure, quick and easy fit
We believe that these are the nicest billet parts that you will find anywhere for your Ducati
Hex locking key is included in each kit
£34.98
inc P&P
Clutch Lock - workshop tool
Works with both 12 & 48 Tooth Clutch Baskets
Strong & lightweight Alloy - CNC Machined billet head
This tool is essential for any DIY or professional mechanic who needs to remove the Clutch on all dry clutch Ducati's
it's clever design allows the inner & outer drums to be locked together whilst still giving good access to the centre nut for removal
Superior in design & quality to other tools & a fraction of the cost!
£74.98
(inc P&P)
748, 916, 996, 998 Hypermotard, 848, S2R Work Shop Wheel Nut Tool
A High Strength Machined Alloy Socket Tool for removing / tightening your rear wheel nuts
The Tool is DUAL sided to fit both the 41mm & 46mm Rear Wheel nuts in one Tool
(Half Inch Drive)
These tools are made using EN58AM CNC Machined alloy (Stainless)
In tests this material proved over 400% stronger than many other similar alloy tools which are prone to failure
(CAN ALSO BE USED WITH POWER TOOLS)
£69.98
inc P&P
