Billet Machined Up-Grade Clutch Slave Kit
All models...
Significantly less lever torque required compared to the standard unit made possible using precision engineering & high quality material together with researched piston design
Now Available from stock in anodised Red, Silver, Blue, Black, Gold
All Parts included
Quick & easy upgrade with supplied installation guide
£79.98
Inc EU P&P 
CTMOTO Brake & Clutch reservoir caps (Brembo replacement)
Monster 600 - 750 - 900 - 1000 - S4 - S4r - S2r - Sport Classic & more
Replace the corroded standard items
Front Brake
£19.98
inc EU P&P
Rear Brake or Clutch cap
£14.98
inc EU P&P
Tripple set (3 caps) - Front & rear brake plus clutch
£44.98
inc EU P&P
CTMOTO Multistrada, Streetfighter, ST & GT1000
Reservoir Covers (pair)
Our 999 caps have been so popular that we were asked if we could have them made to fit your Multistrada's & sport classic models, so here they are
Set available in 6 different anodised colour finishes & includes new stainless screws / Hex key
£39.98 per set Inc EU P&P
Rectangular Covers (Single)
2 sizes of caps are available for Brembo rectangular reservoirs
Size one is aprox 34mm tall (Most Clutches & earlier brake)
NEW* Size two is aprox 41mm tall (brake on many later models)
Use the basket button twice to buy a set as required
available in 5 different anodised colour finishes & include new stainless screws
Sale
price (blue only) £9.98
per
cap Inc EU P&P
Clutch Lock - workshop tool
Works with both 12 & 48 Tooth Clutch Baskets
Strong & lightweight Alloy - CNC Machined billet head
This tool is essential for any DIY or professional mechanic who needs to remove the Clutch on all dry clutch Ducati's
it's clever design allows the inner & outer drums to be locked together whilst still giving good access to the centre nut for removal
Superior in design & quality to other tools & a fraction of the cost!
£74.98
(inc EU P&P)
748, 916, 996, 998 Hypermotard, 848, S2R Work Shop Wheel Nut Tool
A High Strength Machined Alloy Socket Tool for removing / tightening your rear wheel nuts
The Tool is DUAL sided to fit both the 41mm & 46mm Rear Wheel nuts in one Tool
(Half Inch Drive)
These tools are made using EN58AM CNC Machined alloy (Stainless)
In tests this material proved over 400% stronger than many other similar alloy tools which are prone to failure
(CAN ALSO BE USED WITH POWER TOOLS)
£69.98
inc EU P&P
CTMOTO Clutch pressure plate
This Plate is milled from a solid Aerospace grade alloy block to give great strength
Performance is enhanced by keeping its weight ultra low @ only 284g Including Bearing!
Cooling is greatly increased by its distinct open face / spoke design
We have stock available finished in Marine grade anodised Red, Blue, Black, Silver or Gold
High quality SKF bearing fitted!!
Looks AWESOME on your dry clutch Ducati
This plate will fit all standard dry clutch models
(see offers for stainless spring sets)
£79.98
inc EU P&P
