Ducati 749 & 999 Billet Parts

CTMOTO Clutch Cover (Half or Full design)

The Ultimate Cover for your Dry Clutch

This Cover is milled from a solid billet block of Aerospace grade alloy

Unlike molded covers it is ultra strong for its low 147g weight

valuable protection to your expensive Clutch unit

Half Cover £89.98 inc P&P

Full Cover £99.98 inc P&P

CTMOTO Frame Plug Set

CTMOTO 749-999 Billet frame plug set

manufactured to aerospace specification & anodized to give outstanding durability and looks in five anodised colours

The smooth domed design makes these plugs look like they are part of your bike,

beautifully finishing the openings on many Ducati frame tubes

They use our unique refined screw locking mechanism which gives a secure, quick and easy fit

We believe that these are the nicest billet parts that you will find anywhere for your Ducati

Hex locking key is included in each kit

£39.98 inc P&P



CTMOTO Clutch pressure plate

This Plate is milled from a solid Aerospace grade alloy block to give great strength

Performance is enhanced by keeping its weight ultra low @ only 284g Including Bearing!

Cooling is greatly increased by its distinct open face / spoke design

We have stock available finished in Marine grade anodised Red, Blue, Black, Silver or Gold

High quality SKF bearing fitted!!

Looks AWESOME on your dry clutch Ducati

This plate will fit all standard dry clutch models

(see offers for stainless spring sets)

£79.98 inc P&P


749/999 Clutch Set

Includes model specific Collars, stainless springs + stainless screws + installation key

£29.98 per set inc P&P


 Clutch Lock - workshop tool

Works with both 12 & 48 Tooth Clutch Baskets

Strong & lightweight Alloy - CNC Machined billet head

This tool is essential for any DIY or professional mechanic who needs to remove the Clutch on all dry clutch Ducati's

it's clever design allows the inner & outer drums to be locked together whilst still giving good access to the centre nut for removal

Superior in design & quality to other tools & a fraction of the cost!

£74.98 (inc P&P) out of stock

Panigale 749/999 Work Shop Wheel Nut Tool

A High Strength, Machined Alloy, Professional Socket Tool for quick removing / tightening your rear & front wheels (double sided - 2 in 1 tool)

The Tool is DUAL nut tool to fit both the Front & Rear Wheel nuts in one Tool

It will not burgh the teeth on your wheel nuts like poor fitting sockets can

(Half Inch Drive)

These tools are made using EN58AM CNC Machined alloy (Stainless)

In tests this material proved over 400% stronger than other similar alloy tools which are prone to failure


Please Order on Tool page

CTMOTO Paddock stand bobbins (X2)

A pair of machined bobbins with screws to fit 749-999 models

£7.98 per set inc P&P


Dry Clutch, spring Collars (X6)

(see offers for kit inc bolts & springs)

Set of six collars to replace the standard items on 749 999 dry clutch

£15.00 per set inc P&P


Race Oil filler cap

Replaces the standard item on almost all ducati dry clutch models & has

the hole for regulatory steel tie wire for race use

Includes 'O' Ring

£12.98 inc P&P

CTMOTO 749-999 Reservoir Caps

Replace your standard caps with these corrosion resisting billet anodised caps

Kit includes both clutch and brake reservoir caps

hex key for installation & replacement stainless bolts

We have stock available finished in Marine grade anodised Red, Blue, Black, Silver, Titanium or Gold

These will only fit 749/999 models, see here for multistrada / streetfighter / GT1000 caps

£39.98 inc P&P


Rear Brake cap

£14.98 inc P&P


Fork Pre-load adjusters

(Showa or Ohlins)

Allow instant pre-load adjustments to be made on your forks

Complete with stainless steel fasteners and allen key

£22.98 per pair inc P&P

Showa 22mm


Ohlins 17mm


All prices are inclusive of P&P & VAT unless stated

Back to CNC main page